T Scan 100 Handheld Ultrasonic Micrometer – UT NDT

Home » NDT Equipment » Ultrasonic Testing (UT) Systems » T-Scan 100



	Handheld Ultrasonic Thickness Gauge used for measuring the thickness of non-coated materials

The Silverwing T-Scan 100 is a precision Ultrasonic Micrometer that can be used to make reliable measurements or scan a length of material for the thinnest point. Based on the same operating principles as SONAR, the T-Scan is capable of measuring the thickness of various materials with accuracy as high as ± 0.001 inches, or ± 0.01 millimetres. The principle advantage of ultrasonic measurement over traditional methods is that ultrasonic measurements can be performed with access to only one side of the material being measured. The T-Scan’s 100 backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries.

Applications

Corrosion and Pitting

Tanks

Glass

Tube and Pipe

Boilers

Variety of Applications

The T-Scan 100 has the ability to field calibrate on the fly and offers extreme flexibility and accuracy to calibrate to a variety of materials instantly. Simply tell the T-Scan 100 one known thickness point located on the test material, and the T-Scan will calculate the material type for you. The T-Scan is also equipped with a two point calibration option, providing the user with extreme accuracy. Another special feature of the T-Scan 100 is the high speed scan mode. In this mode, the T-Scan 100 takes 16 readings per second rather than 4 readings per second in standard measurement mode. The readings are viewable while scanning. Simply remove the transducer from the area being tested and the T-Scan 100 will display the minimum thickness in the area scanned.

Physical
Dimensions	2.5 W x 4.75 H x 1.25 D inches 63.5 W x 120.7 H x 31.8 D mm
Weight	10 ounces, 285 gram
Operating Temperature:	-20 to 120F (-20 to 50C)
Case:	Extruded aluminum body / nickel plated aluminum end caps. Resistant to impact and environmentally sealed.
Keypad:	Sealed membrane that is resistant to both water and petroleum products. Six tactile-feedback keys.
Transducer:	Dual element (transmit and receive). 1 to 10 MHz frequency range. Locking quick disconnect Lemo connectors. 4 foot cable. Custom transducers available for special applications.
Power Source	Two 1.5V alkaline or 1.2V NiCad AA cells. Typically operates for 200 hours on alkaline and 130 hours on NiCad.
Display:	Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions. Measurements displayed in inches, inches/microsecond, millimeters, and meters/second. Bar graph indicates stability or reading.
Certification:	Factory calibration traceable to national standards.
Warranty:	1 year limited.

Measuring
Range:	Measures from 0.025 to 19.999 inches (0.63 to 199.99 millimeters) switch to select English or metric units.
Resolution:	0.001 inch (0.01 millimeter)
Velocity Range:	.0492 to .3937 in/m s 1250 to 10,000 meters/sec
Built-in:	Stainless steel reference disk for probe zeroing. Four readings per second for single point measurements or 16 per second in SCAN mode. Single and Two point calibration option included.