| Technical Specifications |
| Physical |
| Dimensions |
2.5 W x 6.5 H x 1.24 D inches
63.5 W x 165 H x 31.5 D mm |
| Weight |
13.5 ounces
383 grams |
| Operating Temperature: |
14 to 140F (-10 to 60C)
Case: Extruded aluminum body with nickel-plated aluminum end
caps (gasket sealed) |
| Keypad: |
Membrane switch pad with twelve tactile keys |
| Data Output: |
Bi-directional RS232 serial port. Windows® PC interface
software |
| Display: |
1/8in VGA grayscale display (240 x
160 pixels). Viewable area 2.4 x 1.8in (62 x
45.7mm). EL backlit (on/off/auto) |
| Power Source |
Three
1.5V alkaline or 1.2V NiCad AA cells
Typically operates for 150 hours on alkaline and 100hours on
NiCad (charger not included)
Auto power off if idle 5 min
Battery status icon |
| |
|
Ultrasonic Specifications
|
| Measurement Modes: |
|
| Coating Off: |
Pulse-Echo (P-E) |
| Coating On: |
Pulse-Echo Coating (PECT) |
| Temp Comp: |
Pulse-Echo Temperature
Compensation (PETP) |
| Thru-Paint: |
Echo-Echo (E-E) |
| Coating Only: |
Coating (CT) |
| Pulser: |
Dual square wave pulsers |
| Receiver: |
Dual receivers - manual or AGC gain control with 110dB range |
| Timing: |
Precision 25 MHz TCXO with single shot 100
MHz 8 bit ultra low power digitizer |
| |
|
| Measuring |
| Range: |
Pulse-Echo Mode (P-E) - (Pit & Flaw Detection) Measures
from 0.025 to 19.999 inches (0.63 to 508 mm) |
Pulse-Echo Coating Mode (PECT) -
(Material, Coating, Pit &
Flaw Detection): Material: |
0.025 to 19.999 in (0.63 to 508mm).
Coating: 0.001 to 0.100 in (0.01 to 2.54mm) |
Pulse-Echo Temp Comp Mode (PETP) - (Pit & Flaw Detection):
Auto temperature compensation - measures from |
0.025 to 19.999in
(0.63 to 508mm) |
| Echo-Echo Mode (E-E) - (Thru Paint & Coating) Measures from |
0.100 to 4.0in (2.54 to 102mm). Range will vary +/- depending
on the coating |
| Coating Only Mode (CT) - (Coating Thickness) Measures from |
0.0005
to 0.100in (0.0127 to 2.54mm). Range will vary +/- depending
on the coating |
| Resolution: |
+/- 0.001in (0.01mm) |
| Velocity Range: |
0.0492 to 0.5510in/ms
1250 to 13995 meters/second |
| |
Single and Two point calibration option for material & coating,
or selection of basic material types |
| Units: |
English & Metric |
| |
|
| Display |
| Large Digits -
Standard thickness view. Digit Height: |
0.700 inches (17.78 millimeters) |
| B-Scan: |
Time based cross section view. |
| Display speed of 15
secs per screen, Scan Bar Thickness: |
6 readings per second.-
Viewable in B-Scan and large Digit views |
| Repeatability Bar Graph: |
Bar graph indicates stability of reading |
| Feature Status Bar: |
Indicates features currently active |
| |
|
| Data Logger T-scan 300DL |
| Log Formats: |
Grid (alpha numeric)
Sequential (auto identifier) |
| Cell Content: Graphics On: |
16,000 readings, B-Scan image &
gauge settings for every reading |
| Graphics Off: |
210,000 readings (coating, material, min &
max)
OBSTRUCT to indicate inaccessible locations
|
| Memory: |
32 megabit non-volatile ram |
| |
|
| Transducer |
| Transducer Types: |
Dual Element (1 to 10 MHz)
Locking quick disconnect "00" LEMO connectors
Standard 4 foot cable
Custom transducers and cable lengths available for special applications
Certification
Factory calibration traceable to national standards
|
