Scorpion DCP & Scorpion BP
ONE SYSTEM, TWO OPTIONS.
Scorpion is a rugged remote access crawler designed to allow cost effective ultrasound thickness measurements on above ground ferro-magnetic structures.
Scorpion DCP
|
The Scorpion DCP remote access crawler uses a unique “Dry Coupled” wheel probe eliminating the need for traditional couplant. This allows the crawler to travel vertically, horizontally or even inverted whilst still fully functional. Compatible with ANY ultrasonic system, a 50 metre umbilical cable allows access to the furthest point of most structures without the need for scaffolding. Powered by the Sitemaster 30 battery pack, the system is capable of 8 hours continuous operation on a single charge. |
 |
• Unique dry coupled wheel transducer • Remote operation with NO height restrictions • 12VDC self contained system |
Technical and Performance Specification
| Dimensions | Length 385 mm x Width 222 mm x Height 102 mm |
| Weight without cables | 4.75 Kg |
| Adhesion | Neodymium iron boron magnets mounted in centre of carriage |
| Pull off force | 13.6 Kg |
| Drive | four (4) independent 12 volt Dc motors |
| Drive wheels | coated in special non-slip synthetic rubber compound |
| Speed | 25 mm/second |
| Umbilical Cable length | 50 metre |
| Transducer | Dry coupled wheel using "Ro-Cee" rubber 5 Mhz dual / twin compression transducer |
| Near surface resolution | 2.5 mm |
| Power supply | 28 Ah sealed lead acid gel battery pack with integral charger |
| Test time | 8 hours complete system |
Scorpion BP
| The Scorpion BP remote access crawler comes supplied with an irrigated dual 5MHz transducer fed from a pressurised stainless steel reservoir. Compatible with ANY ultrasonic system, a 30 metre umbilical cable with water feed allows access to the top of the highest storage tank for remote access measurements. Powered by the Sitemaster 30 battery pack the system is capable of 8 hours continuous operation on a single charge. |
 |
 |
• Pressurised water supply • Remote operation with height restrictions • 12VDC self contained system |
Technical and Performance Specification
| Dimensions | Length 385 mm x Width 222 mm x Height 102 mm |
| Weight without cables | 4.75 Kg |
| Adhesion | Neodymium iron boron magnets mounted in centre of carriage |
| Pull off force | 13.6 Kg |
| Drive | four (4) independent 12 volt Dc motors |
| Drive wheels | coated in special non-slip synthetic rubber compound |
| Speed | 25 mm/second |
| Umbilical Cable length | 30 metre |
| Transducer | Dry coupled wheel using "Ro-Cee" rubber 5 Mhz dual / twin compression transducer |
| Near surface resolution | 2.5 mm |
| Power supply | 28 Ah sealed lead acid gel battery pack with integral charger |
| Test time | 8 hours complete system |
Download PDF version of this Online Brochure
Back to Equipment Main Page