T-Scan 100 - Handheld Ultrasonic Thickness Gauge used for measuring the thickness of non-coated
The Silverwing T-Scan 100 is a precision Ultrasonic Micrometer that can be used to make reliable measurements or scan a length of material for the thinnest point. Based on the same operating principles as SONAR, the T-Scan is capable of measuring the thickness of various materials with accuracy as high as ± 0.001 inches, or ± 0.01 millimetres. The principle advantage of ultrasonic measurement over traditional methods is that ultrasonic measurements can be performed with access to only one side of the material being measured. The T-Scan’s 100 backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries.
Applications
- Corrosion and Pitting
- Tanks
- Glass
- Tube and Pipe
- Boilers
- Variety of Applications
The T-Scan 100 has the ability to field calibrate on the fly and offers extreme flexibility and accuracy to calibrate to a variety of materials instantly. Simply tell the T-Scan 100 one known thickness point located on the test material, and the T-Scan will calculate the material type for you. The T-Scan is also equipped with a two point calibration option, providing the user with extreme accuracy. Another special feature of the T-Scan 100 is the high speed scan mode. In this mode, the T-Scan 100 takes 16 readings per second rather than 4 readings per second in standard measurement mode. The readings are viewable while scanning. Simply remove the transducer from the area being tested and the T-Scan 100 will display the minimum thickness in the area scanned.
Physical
|
Dimensions
|
2.5 W x 4.75 H x 1.25 D inches 63.5 W x 120.7 H x 31.8 D mm
|
|
Weight
|
10 ounces, 285 gram
|
|
Operating Temperature: |
-20 to 120F (-20 to 50C)
|
|
Case:
|
Extruded aluminum body / nickel plated aluminum end caps. Resistant
to impact and environmentally sealed. |
|
Keypad:
|
Sealed membrane that is resistant to both water and petroleum
products. Six tactile-feedback keys.
|
|
Transducer:
|
- Dual element (transmit
and receive).
- 1 to 10 MHz frequency range.
- Locking quick disconnect Lemo connectors.
- 4 foot cable.
- Custom transducers available for special applications.
|
|
Power Source |
Two 1.5V alkaline or 1.2V NiCad AA
cells.
Typically operates for 200 hours on alkaline and 130 hours on
NiCad. |
|
Display:
|
Multi-function 4.5 digit liquid crystal display with 0.500 inch
numerals, backlit for use in poor light conditions.
Measurements displayed in inches, inches/microsecond, millimeters,
and meters/second.
Bar graph indicates stability or reading. |
|
Certification:
|
Factory calibration traceable to national standards.
|
|
Warranty: |
1 year limited.
|
Measuring
|
Range: |
Measures from 0.025 to 19.999 inches (0.63 to 199.99 millimeters)
switch to select English or metric units. |
|
Resolution:
|
0.001 inch (0.01 millimeter) |
|
Velocity Range: |
.0492 to .3937 in/m s
1250 to 10,000 meters/sec |
|
Built-in: |
Stainless
steel reference disk for probe zeroing.
Four readings per second for single point measurements or 16
per second in SCAN mode.
Single and Two point calibration option included. |